2.8v6 tpi and a 730

[Ernst denBroeder <edenbroe@cisco.com>]

>         Ya but tuner cat is kinda basic... it will not help with the dis
>part of the v6 oem calib.
>         Hard to pt dis on the jimmy....been down that rout on the list a few
>time I believe..

(Changed the subject to better describe the tread.)

I'm not interested in putting DIS on this engine.  I just want to use the 
'730 the way it is used on a V8 tpi but with two less holes in the engine 
block.  :)

I'm assuming here that a v6 2.8 DIS memcal can be reprogrammed with AUJP(?) 
and edited to work with 6 cyclinders (kinda like how a 350 '747 tbi bin can 
be made to run on a v6 by only changing the # cyclinders).  I guess I 
really need to sit down and go thru the '730 hack and read it.

Ernst