Re: DIS Module component ID

[Peter Gargano <peter@ntserver.techedge.com.au>]

According to a Holden VS schematic I now have, the DIS
 C, F and J signals have now been determined to be:

 C  18X crank signal    (out)
 F  Cam position signal (out)
 J  Cam sensor          (in)


I originally wrote:

> BTW - here are the DIS pinouts I have from some Holden info:
> 
>  pin  function                      connections
>  -------------------------------------------------------------
>   A  EST signal (in)            <-- from '808 D4 EST OUTPUT
>   B  BYPASS Control             <-- from '808 D5 BYPASS CONTROL
>   C
>   D  CRANKshaft REFerence (out) --> to '808 B5 CRANK REF INPUT
>   E  Tacho Signal (out)
>   F
>   G  x18 crank sensor (in)      <-- from pin B on Hall Sensor
>   H  x3  crank sensor (in)      <-- from pin A on Hall Sensor
>   J
>   K  n/c
>   M  crank sensor GND           --> to pin C on Hall Sensor
>   N  crank sensor POWER         --> to pin D on Hall Sensor
>   P  POWER from IGN switch
> 
> So, what are pins C, F & J?  K is not connected to any
> components. C and F appear to be outputs like the CRANK REF
> signal. Pin J appears to be an input to pin 4 of the 18 pin
> DIP.
> 
> regards,
> --
> Peter Gargano