[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 730/727



cool how much would you want to grab one for me? I'm looking for a 
1990-92 2.5 L4 TBI "R" LR8 ("W" body)

or a 730  out of a 

1987 2.0 L4 TBI "1" LL8
1988 2.0 L4 TBI "1" LL8 (early)


Previously, you (Dave Williams) wrote:
{ 
{ -> how much are the 727 and harnesses costing you??
{ 
{  $50 for the harness and computer.  And about three hours of cursing to
{ remove the them.  I'm getting faster at it, though.
{ 
{  I snagged a 730 and harness from a 2.8 car last week.  I knew the 730
{ was used for both distributor and distributorless setups; this harness
{ is for a distributorless V6.  I plan to find which pins the 730 us
{ for spark signal on a distributor application and hook them to the HEI

there are a few 730 pinouts on 
http://10.0.0.222:8080/ftp://efi332.eng.ohio-state.edu/incoming/


look for 

ftp://efi332.eng.ohio-state.edu/incoming/90-7727V8TPI-3.jpg

{ and coil, pop in a V8 chip, and splice two more injector plugs into the
{ injector subharness.  Are there any gotchas I might run into?

I don't know, Ludis's site lists

1990-91 5.7 V8 TPI "8" L98 ("Y" body) as a 727

{ 
{ ==dave.williams@chaos.lrk.ar.us======================================
{ I've got a secret / I've been hiding / under my skin / | Who are you?
{ my heart is human / my blood is boiling / my brain IBM |   who, who?
{ =================================== http://home1.gte.net/42/index.htm
{                                                                                             

--
Pat Ford                           email: pford@qnx.com
QNX Software Systems, Ltd.           WWW: http://www.qnx.com
(613) 591-0931      (voice)         mail: 175 Terence Matthews          
(613) 591-3579      (fax)                 Kanata, Ontario, Canada K2M 1W8