[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 96 LT1

To: <gmecm@efi332.eng.ohio-state.edu>
Subject: Re: 96 LT1
From: "gene l. clifford" <genelc@idworld.net>
Date: Sat, 8 Jan 2000 20:53:09 -0600
References: <Pine.BSI.3.95.1000108201606.4792A-100000@horizon.hit.net>
Reply-to: gmecm@efi332.eng.ohio-state.edu
Sender: owner-gmecm@esl.eng.ohio-state.edu

Thanks Roger
I am aware of the cooling diff and believe I can deal with that?
also in order to drive the oil pump in an LT-1 the cam still has the drive
gear integral
there is a short stub shaft to drive the oil pump I am certain that one
could use a std. HEI dist
but I am hoping to use the dist.on the front?
URL on LT1 cooling system
http://www.theherd.com/articles/lt1_cool.html
                                          Gene

References:
- Re: 96 LT1
  - From: Roger Heflin <rah@horizon.hit.net>

Prev by Date: Re: 730/727
Next by Date: Re: more DIS questions
Previous by thread: RE: 96 LT1
Next by thread: Re: 96 LT1
Index(es):
- Date
- Thread