[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Crank Angle Sensors

To: gmecm@efi332.eng.ohio-state.edu
Subject: Crank Angle Sensors
From: "Rich Vandervoort" <richvandervoort@hotmail.com>
Date: Mon, 10 Jan 2000 20:10:04 PST
Reply-to: gmecm@efi332.eng.ohio-state.edu
Sender: owner-gmecm@esl.eng.ohio-state.edu

Do any SBC use a timing cover mounted crank angle sensor? Is the reluctorpermanently mounted to the crank shaft? What is an approximate year andapplication so I search for one?


Thanks,
Rich
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

Follow-Ups:
- Re: Crank Angle Sensors
  - From: "Bruce Plecan" <nacelp@bright.net>
- Re: Crank Angle Sensors
  - From: Shannen Durphey <shannen@grolen.com>

Prev by Date: Re: LT1 manifold question (sort of NOT ECM related)
Next by Date: RE: Freighting an engine.
Previous by thread: Re: LT1 manifold question (sort of NOT ECM related)
Next by thread: Re: Crank Angle Sensors
Index(es):
- Date
- Thread