[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Memcals



>  Think of it as a Buick Grand National that
> can carry a lot of kegs.
>
> --steve

Steve isn't that "Kids"?   ;-)  My GN seats 6 "kids" but one has to drive
and one has to work the pedals. No KEGS allowed near the GN.

You can actually read, erase, then re-program a memcal's Eprom without
de-soldering it if you buy a GC Electronics 40 pin test clip PN  GC#41-9140
(of coarse a 28 pin may be more appropriate) and wire part of it to a 28 pin
socket. Put the factory sticker right back on the PROM for that show quality
finish ;-) I think JDR microdevices carries it www.jdr.com  or
www.newark.com I tried searching for the manufacturers part number on those
sites and nothing. good luck.

the thing clamps on the outside of the pins like a wide clothespin and
contacts each pin individually.