[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RE;Re: What model ECM is this ?

To: gmecm@efi332.eng.ohio-state.edu
Subject: Re: RE;Re: What model ECM is this ?
From: Swayze <kswayze@bellsouth.net>
Date: Sun, 16 Jan 2000 20:28:49 -0500
References: <f3.1ce55d.25b07fc8@aol.com> <387F2DD2.ED09D127@bellsouth.net> <00a001bf5edd$4271c980$3f0ac9d8@v1b1k1> <002201bf5ee0$9d72e0a0$385265cb@gsr> <387FA8AF.51530741@arm.com> <001401bf5f2e$e14e4280$7146e2d8@mjohnson2> <38800050.6F844866@teamzr1.com> <008b01bf5f1c$7ed6e9c0$3f0ac9d8@v1b1k1> <38800FB3.12DC698E@teamzr1.com> <38801C98.890D8448@grolen.com> <3880233A.192FF522@teamzr1.com> <004b01bf5f5f$6db0d320$34258fd1@v1b1k1> <3880A80D.15EC1B8D@teamzr1.com> <018701bf5f7f$fe748e40$34258fd1@v1b1k1> <3882006B.4A12BEF8@teamzr1.com> <388225B2.6026878F@bellsouth.net> <38822A19.AB7EDDC9@teamzr1.com>
Reply-to: gmecm@efi332.eng.ohio-state.edu
Sender: owner-gmecm@esl.eng.ohio-state.edu

You'll have to look in the archives to
get the specifics but I believe it is
the way the ecm fine tunes the values in
the data tables. I'm not sure but it
could be a way to adjust the dyno tuned
parameters for each track (just reset
the block learn ? and drive it). I have
only seen it discussed here I've never
researched it.
byE
Mike S.

Team ZR1 wrote:
> 
> Mike, what is a BLM ?
> 
> John
> 
> Swayze wrote:
> 
> > It would be interesting to see what BLM
> > was on this car and/or if it could be
> > used to make the track adjustments.
> > byE
> > Mike S.
> >

References:
- Re: Memcals
  - From: JTesta1966@aol.com
- Re: Memcals
  - From: Swayze <kswayze@bellsouth.net>
- Re: Memcals
  - From: "Bruce Plecan" <nacelp@bright.net>
- Re: Memcals
  - From: "Geoff Richards" <gerich@one.net.au>
- Re: Memcals
  - From: steve ravet <sravet@arm.com>
- Re: Memcals
  - From: "Dave Zug" <dzug@delanet.com>
- What model ECM is this ?
  - From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
  - From: "Bruce Plecan" <nacelp@bright.net>
- Re: What model ECM is this ?
  - From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
  - From: Shannen Durphey <shannen@grolen.com>
- Re: What model ECM is this ?
  - From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
  - From: "Bruce Plecan" <nacelp@bright.net>
- Re: What model ECM is this ?
  - From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
  - From: "Bruce Plecan" <nacelp@bright.net>
- Re: What model ECM is this ?
  - From: Team ZR1 <teamzr1@teamzr1.com>
- RE;Re: What model ECM is this ?
  - From: Swayze <kswayze@bellsouth.net>
- Re: RE;Re: What model ECM is this ?
  - From: Team ZR1 <teamzr1@teamzr1.com>

Prev by Date: Re: Timing Jump on 165/TPI System
Next by Date: Re: .bin file needed..
Previous by thread: Re: RE;Re: What model ECM is this ?
Next by thread: Re: What model ECM is this ?
Index(es):
- Date
- Thread