Re: '730 ecu

["Bruce Plecan" <nacelp@bright.net>]

I hope I said sometimes, on the header.
For fuel on a MAP system, all I recall is a 100Kpa.
There can be other tables that stop at 80 like for EGR, and various emission
strategies.
And some tables can be VAC, or Baro., on a MAP type system.  So life can get
complex on the table "values"...
Hope that helps clear things up.
Grumpy


| Let me know if any of it works,
| the winbin .ecu file cleared up the prom
| edit format questions I had.
| one of the VE tables in the promedit is
| 9x9 and 9x11(or was it 13?)in the winbin
| file.
| I have seen differences in the MAP axis
| labeling too.0-80 vs. 0-100kpa. is there
| a marker that shows the start of each
| table. Grumpy had mentioned a 3 byte
| header?
| byE
| Mike S.
|
| Programmer wrote:
| >
| > thanks Mike.
| > I've also heard acetone works great and doesn't
| > remove labelling.
| >
| > Lyndon.
|