[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Got Diacom to work on Snakeskinner

To: gmecm@efi332.eng.ohio-state.edu
Subject: Re: Got Diacom to work on Snakeskinner
From: Daniel Ciobota <dciobota@hiwaay.net>
Date: Wed, 19 Jan 2000 11:24:44 -0600
References: <20000118120403.89560.qmail@hotmail.com> <3885234C.F4D406D6@teamzr1.com> <3885DCAE.3F0DD1F5@hiwaay.net> <3885E31E.F2ADFCDF@lucent.com>
Reply-to: gmecm@efi332.eng.ohio-state.edu
Sender: owner-gmecm@esl.eng.ohio-state.edu

Ken Kelly wrote:

> I don't know vettes, but I do know F-Bodies. The +12volt
> power pin was added with the OBD-II connector. 94-95
> F-bodies do not supply power through the DLC port. 96 and up
> do provide power. The connector is totally different. I
> assume you had to change cables going from the 89 to a 96.
>

Aha!  Good point Ken, I didn't realize that.  Yes, we did change the adapter,
and the tech2 has an external power chord, which we did not use, since John
insisted it should be powered by the DLC.  Live and learn.

Daniel

References:
- Re: CarBytes V2 now on GM-ECM ftp site
  - From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Got Diacom to work on Snakeskinner
  - From: Team ZR1 <teamzr1@teamzr1.com>
- Re: Got Diacom to work on Snakeskinner
  - From: Daniel Ciobota <dciobota@hiwaay.net>
- Re: Got Diacom to work on Snakeskinner
  - From: Ken Kelly <kenkelly@lucent.com>

Prev by Date: Re: LT5 Info.., and 1228331 stuff in general.
Next by Date: Re: Got Diacom to work on Snakeskinner
Previous by thread: Re: Got Diacom to work on Snakeskinner
Next by thread: Re: Got Diacom to work on Snakeskinner
Index(es):
- Date
- Thread