[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: fuel pump for GM TPI

To: gmecm@efi332.eng.ohio-state.edu
Subject: Re: fuel pump for GM TPI
From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
Date: Wed, 19 Jan 2000 17:19:22 -0600 (CST)
In-reply-to: <v04210105b4abe35c2be3@[17.201.22.102]>
Reply-to: gmecm@efi332.eng.ohio-state.edu
Sender: owner-gmecm@esl.eng.ohio-state.edu

> can someone recommend  a good  out of tank (bulletproof) fuel pump
> for the GM TPI system.

There's probably not one...but for a point of reference, an '88 Ford PU
uses an external pump. Airtex #E2000 from Advanced Auto, etc.  
E8002 is a larger unit.

And according to some of my archives...
E2000 is 35-40 GPH at 75-90 PSI per the Airtex REP.
E8228 38GPH 100PSI
E8248 50-60GPH

See also 
http://www.airtexproducts.com/

Have fun,
-greg

References:
- fuel pump for GM TPI
  - From: Vinnie Moscaritolo <vinnie@vmeng.com>

Prev by Date: Re: LT5 Info.., and 1228331 stuff in general.
Next by Date: 'Nother pinout needed..
Previous by thread: fuel pump for GM TPI
Next by thread: Re: fuel pump for GM TPI
Index(es):
- Date
- Thread