RE: DIS ?????s

[Frederic Breitwieser <Frederic@xephic.dynip.com>]

When I was playing with the 730 on the bench BEFORE I started modifying the
code, I had to give it a signal to indicate about 565 RPM, less than that
and the ECM did very strange things, like chattering the injectors.

-----Original Message-----
From: Bruce Plecan
To: gmecm@diy-efi.org
Sent: 1/21/00 9:18 AM
Subject: DIS ?????s

Ref DIS:

If I supply a rpm signal of over 400 rpm, the ecm will think the engine
is
running, no more/no less (true)?.  With a missing cam sensor signal,
there
is a code set (I think), but will the rest of the data diacom gets, be
accurate?.  Meaning other then a code, and going to batch fire (if it
was
SEFI), is there something else I should look for??.
Grumpy

------------------------------------------------------------------------
----
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org