Re: How do I do a quick test of a 730

["Bruce Plecan" <nacelp@bright.net>]

They only have a pulse if it has a rpm signal.
That will set a bunch of codes.
Still won't tell ya if the injector drivers are working.
For an ecm to be good it needs to react to it's inputs, + generate useable
outputs.  ie injector driver might light LED but not driver an injector.
Grumpy

| Can I hook up a Power, Ground, and ALDL line, and make sure it has a
| pulse?
| if so will this do it?
| A8 - ALDL
| B1 - +12v
| A12 Ground
| ps. if anyone has some indepth knowledge of MAX233's I could sure use
| some help.
| --------------------------------------------------------------------------
--
| To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
| in the body of a message (not the subject) to majordomo@lists.diy-efi.org
|

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org