Re: Northstar DIS

["Bruce Plecan" <nacelp@bright.net>]

All the northstar stuff for what we think of being a DIS module is internal
to the PCM, the crank cam sensors wire straight into the PCM.
To incorporate the Northstar mechanicals would take some really clever
machining, then I/O would be an issue, never mind the code changes.
Grumpy

| Brian,
| If you want, you can fax the diagrams to (603)372-1147, which will come
out
| in graphic image format in my mailbox, in which case I can forward it to
ya
| if you like, so you can pass it around (or I can upload it to the ftp
| server, no biggie).
| If you happen to run across the DIS unit connectors and functions diagram,
| that would be great.  I'm trying to determine if its compatible even
| remotely with my 7749 ECM as a replacement for the HEI I beheaded for my
| Dodge engine.
-Original Message-----
| From: Bja1078@aol.com
| To: gmecm@diy-efi.org
| Sent: 1/25/00 7:58 PM
| Subject: Re: Northstar DIS
| I work in a caddilac derlership what do u need to know I might be able
| to
| tell u, I would scan but my scanner is broken.
| --------------------------------------------------------------------------
--
| To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
| in the body of a message (not the subject) to majordomo@lists.diy-efi.org
|

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org