Re: Crossfire injectors.

["nacelp" <nacelp@bright.net>]

Standard Ingnition Products lists two different part numbers.
Grumpy
   I won't ask why that even matters..


> OK, I just got an e-mail back from LinderTech and he states that the front
> and rear injectors are different part numbers, but are rated as flowing
the
> same "85 mils". What gives? I'd figure that maybe they are just a hair
> different to compensate for the series fuel routing and using a regulator
> and compensator, but since GMs acceptable variance in injector output is
> well beyond "a hair", I don't see why they would do that.
> Also, is there an easy way of converting injector output from "mils" to
> "lb"?
>
> Kevin R
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org