Re: Crossfire injectors.

[Nico Over <nicomax@erols.com>]

It is my understanding that one of the crossfire  injector housings (rear?) does
not have a fuel pressure regulator but holds an accumulator.  As to its exact
function I am unsure. If anyone has one of these TBI's with the accumulator for
sale, please let me know.  Nico Over

Kevin Reynolds wrote:

> I was just curious why GM would go to all the trouble of emphisizing that
> the front and rear are different, don't mix them up or all heck will break
> loose, and give them different part numbers requiring producing and
> inventorying 2 part numbers if they do infact flow the same and are
> physically identical. GM usually don't spend a dime on something if they
> don't need to, so I'm wondering, other than the part number stamped on them
> what is different about them.
> My curiousity just getting the better of me I guess. The answer isn't really
> neccesary for my project since I'll just be sh*t canning them eventually
> anyway.
>
> Kevin R
>
> > Standard Ingnition Products lists two different part numbers.
> > Grumpy
> >    I won't ask why that even matters..
>
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org