Re: Crossfire injectors.

[Shannen Durphey <shannen@grolen.com>]

John_Calabrese@ENGELHARD.COM wrote:

<snip>

>The only baffling I was going to do would be
> via the instructions with the sump.  Drill five or so 1" holes in the bottome of
> the tank, place sump over them and weld.  Of course the tank will have been
> cleaned (professionally) and dried for many days prior. 

To minimize risks, use Argon or another inert gas to force oxygen from
the fuel tank during welding.  Helps take the shakes out of your
welding gloves. : )

Shannen
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org