727,730,injectors

["Swayze" <kswayze@bellsouth.net>]

I am in the process of looking for a complete 90-92 "W" body for the '727 and harness for my 39 Plymouth and have been researching injectors. 
the pinouts for the 3.1L port and 2.5L TBI use D3 and D9 for the injector driver. D8 is grounded to D4 for TBI(peak and hold injector(s)). After looking at the jpg in the archives for the 92 '730 V8 pinouts (BC11 & BC12 inj. drv.) I am wondering what current the driver transistors are capable of handling. 
the caddy-olds intake I have used a ND 1181281(531C) injectors. I have contacted the injector Guru in regards to the specifications on these injectors but have not heard back yet. They are similar to the Bosch style except for where they meet the fuel rail.  I am assuming they are a saturated injector. any suggestions as to a website listing newer versions of these injectors. 
Swayze
mswayze@truswood.com
kswayze@bellsouth.net


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org