[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: LM3914???



FYI: looks like you will also need to build a 10:1 voltage divider for this unit...  it's input range is 1.2V-12V

regards,
Ernst denBroeder


At 11:04 AM 2/7/00 -0600, you wrote:
>Even better; Jameco sells a complete unit that has the LED segments and chip
>all on one board - even less soldering! Costs $6.95 in their catalog. Might
>be a bit more expensive than just buying the chip and a 10-segment LED
>display, but it's a lot easier than trying to fab a board and hopefully not
>fry the LED's or 3914.
>
>http://www.jameco.com is their website.
>
>Ken Kelly (#2)
>
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org