[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: welding tanks - was Crossfire injectors.



Wash it with water and just leave it 3/4 full - not enough air to make much of a
pop. I usually "test" them with a propane torch to make sure they are safe!!!
Tom

Programmer wrote:

> Exhaust is fine, provided the engine is running correctly (not rich
> and not miss-firing) and the exhaust system has no leaks whereby fresh O2 is
> pulled in. Again--it's gotta be a well ventilated area. Still
> not a sure thing...

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org