[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: rats! vats!



This sounds like a TRS80 at work ;-) make sure you crank that playback
volume up.



> Or - a microcassette recorder plugged into the aldl and playback to a
laptop
> later? line level input or direct to mike?


> > Aw, use the easy solution... Use a modem. 9600 and higher are a piece of
> cake.
> >
> > At 09:23 AM 2/9/2000 -0800, you wrote:
> > >You can run a data linkt over a radio, but it has to have beter band
> width
> > >than most to pass an 8 Khz signal, most vice chanels are 3.5 Khz and it
> must
> > >be full duplex since you have to request each data string.
> > >You could re-write that section of code to delete the request data
> function
> > >
> > >On Tue, 08 Feb 2000 20:27:24 PST, gmecm@diy-efi.org wrote:
> > >
> > >>  Speaking of thinking, 8192baud is audible,(baudible?) has anybody
ever
> > >>  hooked a walkie talkie to an aldl so they can monitor the car from
the
> > >pit?
> > >>  Two way data transfer would be a bad idea, "excuse me, but your car
> seems
> > >to
> > >>  be running a little too fast. Let me fix that for ya."
> > >>
> > >>  How 'bout a sound card interface or maybe one of those old junky
> modems
> > >>  laying around. maybe pop a cassette into the car stereo and reprog.
> your
> > >car
> > >>  on the fly.
> >
> > Thanks,
> >         Peter Hipson (founder, NEHOG)
> >         1995 White NA Hummer Wagon
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>



----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org