[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: rats! vats!



I remember the day I got a single sided 5.25" floppy (
flippy) running on my TRS-80, and was able to retire my tape
recorder! I can't believe you still have one running.

		Ken

Programmer wrote:
> 
> Geez--You had one of those too ???!!!
> 
> LW
> -----Original Message-----
> From: Jeff M <tystorm@email.msn.com>
> To: gmecm@diy-efi.org <gmecm@diy-efi.org>
> Date: February 10, 2000 9:26 AM
> Subject: Re: rats! vats!
> 
> >This sounds like a TRS80 at work ;-) make sure you crank that playback
> >volume up.
> >
> >
> >
> >> Or - a microcassette recorder plugged into the aldl and playback to a
> >laptop
> >> later? line level input or direct to mike?
> >
> >
> >> > Aw, use the easy solution... Use a modem. 9600 and higher are a piece
> of
> >> cake.
> >> >
> >> > At 09:23 AM 2/9/2000 -0800, you wrote:
> >> > >You can run a data linkt over a radio, but it has to have beter band
> >> width
> >> > >than most to pass an 8 Khz signal, most vice chanels are 3.5 Khz and
> it
> >> must
> >> > >be full duplex since you have to request each data string.
> >> > >You could re-write that section of code to delete the request data
> >> function
> >> > >
> >> > >On Tue, 08 Feb 2000 20:27:24 PST, gmecm@diy-efi.org wrote:
> >> > >
> >> > >>  Speaking of thinking, 8192baud is audible,(baudible?) has anybody
> >ever
> >> > >>  hooked a walkie talkie to an aldl so they can monitor the car from
> >the
> >> > >pit?
> >> > >>  Two way data transfer would be a bad idea, "excuse me, but your car
> >> seems
> >> > >to
> >> > >>  be running a little too fast. Let me fix that for ya."
> >> > >>
> >> > >>  How 'bout a sound card interface or maybe one of those old junky
> >> modems
> >> > >>  laying around. maybe pop a cassette into the car stereo and reprog.
> >> your
> >> > >car
> >> > >>  on the fly.
> >> >
> >> > Thanks,
> >> >         Peter Hipson (founder, NEHOG)
> >> >         1995 White NA Hummer Wagon
> >>
> >> -------------------------------------------------------------------------
> -
> >> --
> >> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> >> > in the body of a message (not the subject) to
> >majordomo@lists.diy-efi.org
> >> >
> >> >
> >>
> >> -------------------------------------------------------------------------
> -
> >--
> >> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> >>
> >
> >
> >
> >---------------------------------------------------------------------------
> -
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> >
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org