Re: '727/'730 v-8 .bin EGR

[Swayze <kswayze@bellsouth.net>]

Thanks, glad to see you're back.also
found the '727 vette pinouts in the
archives.  there are several '730's on
e-bay so I may end up getting one of
them anyway (put it in the cutlass and
try to get a '727 for the
plymouth-harness and all). just am
getting saturdays mail. I wonder when
i'll get todays.
byE
Mike S.

nacelp wrote:
> 
> Ludis has some of this posted at his site.
> They vary a bunch.
> While lots of the gm wiring lines up by color don't always expect that.
> Pin outs can vary by software
> Grumpy
> 
> > In looking at the various pinouts for '727 and '730 applications I noticed
> that the v-8 '730 app has an EGR solenoid(aujp.bin?) and was wondering in
> using a '727 with aujp.bin where this 'pin' would be? the '727 I have been
> reviewing have been for 3.1L (digital egr)and 2.5L (vacuum egr?). I would
> like to be able to 'switch on/off ' a vacuum controlled EGR. I checked Ludis
> pages but did not see EGR as one of the pinouts. Is there a significant
> difference in the pinouts for a '727 v-8  vs. a '730 v-8 aside from the
> obvious connector differences? off to the archives........
> > byE
> > Mike
> > Swayze
> > mswayze@truswood.com
> > kswayze@bellsouth.net
> >
> >
> > --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> >
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org