Re: re:speedo-heads up disply was: speedometer-transparent first surface reflector needed

["Frank" <repair@frontiernet.net>]

Please send me one.
Frank Pearson
repair@frontiernet.net
----- Original Message -----
From: <cwagner@info2000.net>
To: <gmecm@diy-efi.org>
Sent: Saturday, February 26, 2000 2:16 PM
Subject: re:speedo-heads up disply was: speedometer-transparent first
surface reflector needed


> As for the reflective surface, that is the least of my concerns.
> What I am looking for is for a two or three digit electonic
> speedometer circuit/schematic that I can adapt for use as a HUD.
> If any of the electronic people out there have any thing that can
> help, I could use as much as possible.  By the way, earlier I was
> asking about a tach adapter to convert a v8 signal to a 6 cyl signal,
> etc., I have designed one if anyone wants a copy of the shematic.
> Works good.
>
>
> On 26 Feb 00, at 12:35, Swayze wrote:
>
> > I don't remember what the topic was but a few months ago one of the
www.'s for a discrete electronics mfc. showed the heads up display they were
soon to release. mypersonal thoughts on the subject are to install a
vertical piece of UV- Plexiglas between the dash and the windshield . tinted
> maybe for daylight use. one of the plastics companies probably has
reflection/refraction specs for the various varieties of Plexiglas. they may
even have one that sticks on like window tint film.
> > sounds like surf's up
> > byE
> > Mike
> > Swayze
> > mswayze@truswood.com
> > kswayze@bellsouth.net
> >
> >
>
> --------------------------------------------------------------------------
--
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
> >
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org