Re: Plug reading

[David Cooley <n5xmt@bellsouth.net>]

At 03:57 PM 3/6/2000, you wrote:
> Dave,
> How are you running the vehicle and reading the plugs ? WOT runs, immediate
> shut down and then checking ? What engine, plugs, etc...?
> If this was a Holley, I'd go one range leaner from the description and read
> again...otherwise it sounds pretty close.

This was a hard charge to almost 100MPH then throwing it in neutral and 
turning the key off.
Coasted into a parking lot and pulled them one at a time.
The engine is a 1997 Ford 5.0L V8 in a 1997 Ford Explorer.
Just added Motorsports headers to it.
it has headers, 3" cat back exhaust, K&N air filter and enlarged the tiny 
snorkle to a 4" diameter hole.
Truck has 3.73 gears, AWD and auto trans.

===========================================================
David Cooley N5XMT Internet: N5XMT@bellsouth.net
Packet: N5XMT@KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
===========================================================

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org