[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: VATS



Two preliminary guestions.
Can you edit and burn your own proms?.  (If yes, look at www.tunercat.com)
What memcal are you starting with?.
Memcal wise you need one from a v-8, if you have the Broadcast code, (we)
the list can usually pin it for what was meant for.
Grumpy



> I have an 81 Corvette that I have installed 91 Vette TPI parts into.
> This was a small budget project so I found one part from one junk yard
> and another from somewhere else.  I have an GM ECM 1227727 which came
> from a yard back east.  Now that I am installing it I believe the Vehicle
> Anti-Theft Security (VATS) has locked me out.  The wiring harness and
> computer didn't come with a key.  I have see third party PROMS that have
> the VATS disabled, but they are usually very expensive.  I would like to
> either find the desired resistance value in the PROM or reset the PROM to
> expect zero resistance.
> Keith


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org