Re: MAP signal dampening

[Tom Sharpe <twsharpe@mtco.com>]

Can't hear it, no plug indication, No sensor, spark retards w/ throttle
application . I have an automatic with a 10" sloppy converter in a lite car,
tach is above 4K before your foot can hit the floor. Really tuff to make it
ping.

Programmer wrote:

> And you're getting a pump shot "ping" ?
>
> Lyndon
> -----Original Message-----
> From: Tom Sharpe <twsharpe@mtco.com>
> To: gmecm@diy-efi.org <gmecm@diy-efi.org>
> Date: March 17, 2000 7:29 PM
> Subject: Re: MAP signal dampening
>
> >232-244 @.050, 10 deg separation, 4 deg adv. Lotts of torque, Brodix heads
> on a
> >6" rod 406 SBC, 10.45CR +003 deck. No ping, 34 total wot, 44(+10) cruse, 20
> >idle-2K, retards under 2500 rpm w/ throttle application, 28deg@3500 all in
> by
> >5K, 2 deg retard @ 6K. NO EGR.  Tom
> >

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org