RE: Help with '85 Corvette '870 ECM

["Craig Marcho" <marcho@global101.com>]

Well, i'm aware of the swap to the '160, but what I'm looking for is more
along the lines of what parameters to change in the EPROM based on the mods
I've done to my car....

> > > Here's what I've done:
> > > Rebuilt '85 TPI motor, everything is stock except cam: 280/280
advertised,
> > > 214/214 @ .050, .443/.443 lift. I've opened up the airbox lid, removed
maf
> > > screens, bypassed TB coolant line, no cat, and Ford 24lb Injectors.
> > > Now, where do I start making changes? My BLM numbers are about 118
around
> > > town, and at WOT they hit 128 like they should, and O2 sensor is about
938.
> > > Is there somewhere in Diacom that tells me what LV8 is being used at
any
> > > given time? What things should I change in the chip for my cam and
> > > injectors? I've got the stock '870 ECM with some 2732A EPROM's.

I really don't want to swap ECM's yet, I've done enough work on the car
recently, and I'd like to play around with what I've got. Also, I'm still
looking for an ecu file for the corvette 870 ECM.

What kinds of things do I change to make this car run better with that cam
and injectors?

Thanks for the help!

Craig M.


> -----Original Message-----
> From: owner-gmecm@diy-efi.org [mailto:owner-gmecm@diy-efi.org]On Behalf
> Of Gabe
> Sent: Tuesday, March 21, 2000 3:44 PM
> To: gmecm@diy-efi.org
> Subject: Re: Help with '85 Corvette '870 ECM
>
>
> Hello, I have done the '870 to '165 swap.  Solved some problems
> for me, and
> there's a lot more support out there for it.
>
> Mike Davis on this list has done the swap as well.  His webpage
> on the subject
> is at: http://www.eecis.udel.edu/~davis/z28/ecm_swap/
>
> Gabe

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org