[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: added baro sensor to 730



jsg@jsgpc.mrcday.com wrote:
 
> In following up on the VE stability I posted of last week, I've shown
> that the baro error can easily make several percent VE error when the
> code is left stock and a supercharger is added.
> 
> To address this, I elected to add a second MAP sensor and patch the
> code. Power and ground are attached identical to the original sensor,
> and the signal is attached to GF14 (a/d channel 0).

Seems like a lot of added work.  Why not just read the MAP for baro at
start up and then defeat the engine running baro re-calc code?  That
code is probably what is screwing your baro up.

Scot Sealander
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org