[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: E-prom ereaser& burner



Good point Shawn !!!!!
I am looking to find here in Brazil some 29C256 to avoid waiting for UV
erasing the 27c256....
Do you know what could be used instead of a 27C512 PLCC Eprom???
Does exist any 29C512 Flash in PLCC.???????
I have tried the 28F512 but is not pin compatible....
To test in my car ( Fiat Marelli ECU) each time I spend a PLLC chip, because
they dont have window...
Many thanks

-----Mensagem Original-----
De: Shawn R. Lin <slin01@mail.orion.org>
Para: <gmecm@diy-efi.org>
Enviada em: Sexta-feira, 24 de Março de 2000 04:18
Assunto: Re: E-prom ereaser& burner


> Brent Obermiller wrote:
> >
> > I also have the PB10 and DataraseII.  It works great,
> > although I have nothing to compare it to.  The only reason
> > not to buy the PB10 is if you have or plan to use a laptop
> > PC, as you need a regular card slot.
>
> I have an M2L Electronics EZ-EP programmer.  It works great, and can
> even auto-detect some ROM chips so you don't have to pick them out of
> the menu.  It is a parallel port device and I use it on my PC and my
> laptop.  Works with most EPROMs, EEPROMs, and Flash ROM.
> They are $170 from http://www.m2l.com.
> I have no affiliation with the company, but the owner is a really nice
> guy.  Around 3 or 4 years ago as a poor college student, I wanted a
> parallel port programmer that could do Flash ROM.  Most were out of my
> price range.  I wrote to M2L asking for more info about their EZ-EP, and
> at the end of the message I only half jokingly asked if they offered any
> student discounts or anything.  He replied that he would sell me an
> early prototype for $80 if I were interested, only difference being the
> PCB layout wasn't as clean (a few wire jumpers) and no power LED.  I
> bought it, and it has worked perfectly ever since.  In the next few
> months, I burned many flash chips, and came across some new ones that
> the programmer didn't support.  Again I wrote to M2L, asking the owner
> if he could write in support for the new flash chips.  He said to just
> email a datasheet, and he'd start working on it.  So I located and dl'ed
> the .pdf datasheets and emailed them to him.  A few weeks later, a new
> version of the software came out with support for the new chips.  I
> think in the end I asked him if he could implement support for at least
> 3 new flash chips, and if I remember correctly, they are all supported
> in the latest software.
> Definitely a respectable company that I highly recommend.  It may be
> more programmer than necessary, but if you want to be replacing 27C256's
> with 29C256 flash ROMs like I do, then it may just come in very handy.
> Anyway, that's my 2 cents.
>
> --
> Shawn Lin
> http://www2.cybercities.com/g/gmwbodycars/
> __________________________________________
> NetZero - Defenders of the Free World
> Get your FREE Internet Access and Email at
> http://www.netzero.net/download/index.html
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org