Re: 7749 guru needed....

["nacelp" <nacelp@bright.net>]

Might try changing injector size since running such high FP.  Have you
checked that you have suffiecent volume at that pressure?.
Grumpy


> Stock injectors, FP @ 50psi static.  Idle was *always* way rich, just
> decided to start there & see just how the fuel tables affected things.
> Zeroing out the tables isn't unheard of, was suggested to me by Brian
> Green, who does a lot of SyTy chipping.
>
> I'll send you the .BIN personally, no need to clutter up the list.
>
> Thanks - Barry
>
> At 09:47 PM 04/01/2000 -0500, you wrote:
> >
> >It's getting to where I'm having trouble picturing this in me head.  Can
you
> >cut and paste some of what your talking about?.
> >You, 0'd out a fuel table,, ie the closed throttle one to get it to idle
at
> >128s?.
> >I've never had to so that, what for injectors ya running?.  Or where is
the
> >fuel pressure set?.
> >Maybe, this is what it will take, I'm just surpicous about the drastic
> >changes going of idle to the other VE table.
> >Grumpy
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org