[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Sensitivity of GM Knock Sensors

        Thanks Mark and Programmer for the input on the KS. I tried the tape
and did not see any change on the TECH 1. Next I will try to reduce the
torque. Right now I am at 150 inch pounds. I guess I will try 125 or 120 and
see if any change.

                        Jim


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org