[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

another Memcal ?



I have a Memcal from a 91 3.1L PFI v6. If the prom is reprogrammed to the V8 specs I want, does anyone know if the ESC on this chip will work as long as I use the Knock sensor from the V8? I know the Knock sensors are vehicle and Engine Specific but are the modules? I was told by one individual the ESC was the reason I couldn't use the v6 one because it supposedly didn't have the ESC on the chip but the v8 did this was backed up with pictures of the chips, but for some reason my chip has the ESC on it.

Also does anyone know of a sight that you can look up information on the EPROM that the GMECM sight don't have or is it somewhere on the sight that I haven't found? IE I want to find out what the AUWX, I think was what was on the chip, is for.  I found out that it was for a 91 3.1 PFI V6 but I had the vehicles Vin.

Thanks,
Todd

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org