Re: Eprom???

["Jeff Flanary" <jefff@mounet.com>]

This is probably not right, but i was playing with Winbin, and put the .bin
file for the chip in, and had several of the .ecu files on the diy efi site.
I could only get Winbin to work right on one of the .ecu files with my prom
.bin file.  It told me the prom ID was 38  223.  Does this sound right?  We
went into the hex file and checked the locations stated  in the .ecu file
and came up with these same 2 numbers when converted to dec.  Thanks, Jeff
----- Original Message -----
From: <JTesta1966@aol.com>
To: <gmecm@diy-efi.org>
Sent: Friday, April 14, 2000 2:24 PM
Subject: Re: Eprom???


> In a message dated 4/14/00 1:18:32 PM Eastern Daylight Time,
jefff@mounet.com
> writes:
>
> << I don't know what you mean by ID ing on a scanner, i'm new to this
stuff,
> so
>  any help would be appreciated.
>   >>
>
> Sorry, simply the prom ID displayed on a scan tool.
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Jim Testa                                         TType86 on #BuickGN
> jtesta1966@aol.com                               buick.fiendish.net:6667
> ASE Master Technician            NJ Lic. Motor Vehicle Inspector
> L1 Adv Eng Perf Certified     NJ Licensed Emissions repair Tech
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org