[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: PCM connectors



Grumpy,
	The 16181333 is a 94-95 Corvette PCM. It is nearly identicle to the 8051, and
uses the same connectors that I described earlier.

		Ken

nacelp wrote:
> 
> OK, let me try again, toooo many numbers today,
> 
> I want to be able to work on a flash pcm, I think that's a 16181333, that
> should be a 1994 MY, and use three connetors at the pcm.  I have a Blue,
> Black(ish), Clear/white, set.  Does all of the above now match?.
> 
> Item two, the 92-93,  16159278, uses the 727 type connetors?.  Is there a
> way to move pins around in these?.  Has anyone got the part numbers for
> them?.  I tried talking to John Flagg about these but with out a camera,
> can't get anywhere.
> Thanks
> Bruce
> 
> > > I finally was able to get some pcm connectors from a 94 F-Body.  I
> thought
> > > that they were red white/clear and blue.  The ones I wound up with are
> Blue,
> > > Black (ish), and clear/white.
> > >   No serial number, just a spray paint on the door (I think it was a
> door),
> > > of MY.   I'm looking to eventually play with a  16159278.   Are these
> the
> > > right or wrong bits?.
> > > Thanks
> > > Grumpy
> >
> > A 16159278 is a 92-93 ybody/93 f-body computer.   I don't know if the
> > pcm connectors are different or not.  I would suspect the are since
> > the 94's are SFI and the 93's are batch fire (two banks).
> >
> > Roger
> >
> > --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> >
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org