Hey guys this is what i got.
these readings are at WOT from diacom. 1st gear 4175 02 reads .876 How the hell do i adjust the fuel curve? 1st and second are good but third is way rich.. all i can do is add-subtract fuel by rpm, can't do anything for gearing.... those readings are taken off the same run. at 4650 in 3rd i was at .956 02 voltage!!! trying to get a good curve of .9 all the way but 1st is always leaner than second, and second is always leaner than third... should i tune for 900 at second and let 1st be a tad lean and third rich or what? thanks, |