one step back = one step up...

[Shannen Durphey <shannen@grolen.com>]

Well, first test of DIS plus 749 Syty code w/ timing light connected
looked promising, but was unsuccesful.  Scantool was displaying
decreasing advance, as the timing light was showing an increase.  
Positive side is that the 60 degree ref angle was no problem, with
actual advance being measured from 0 to 60 degrees BTDC.

Shannen
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org