Re: Turbo Tuning/VE

["Jeff M" <tystorm@email.msn.com>]

I was thinking this, but how it is based, as there is no "load" for the F30
table, it appears to be added to rpm, without load? that can't be but I
understand that the 2 can be added, thanks Jeremy, maybe there will be some
more contributions for us.  Jesse


> Hi Jesse,
>
> Sounds like a cool project...
>
> If your bin is like mine (3.1 n/a), the F29 table is added to the F30
> table.
>
> Jeremy


>>Next is the infamous VE tables, 3 of them, F29 (TPS >/= to 2%) base VE
>>for 600 to 4000 rpms and vac to boost load ranges, cool.  Then the F29
>>Extended table for TPS < 2% good again.  Now knowing the big F29 is for
>>main driving and the Extended F29 for fine tuning idle fuel I am left
>>with..F30 VE vrs RPM for?  For this table, RPM is below idle to near read
>>line and is a one liner (not 3D table) that I am not sure how to use, and
>>which VE first to tune.  Can it be that the F30 is a bulk change (maybe
>>get the injectors closer right off?) and the F29s for the rest? Jesse



----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org