Re: vortec distributor pn 1104051

["nacelp" <nacelp@bright.net>]

Just use the matching front cover/sensor
Grumpy

> So add a crank sensor and I can then determine:
>
> 1) TDC
> 2) #1 TDC
>
> Just what is needed for the '332 project.
>
>
> ----------
> From: nacelp[SMTP:nacelp@bright.net]
> Sent: April 18, 2000 7:10 PM
> To: gmecm@diy-efi.org
> Subject: Re: vortec distributor pn 1104051
>
>
>
> > So does the hall effect sensor pulse 1 per rev?
>
> Once per distributor revolution, or once every other crank revolution.
>
>  If so then it may be possible to determine TDC #1?
>
> Yep.
> Grumpy
>
> >
> >
> >
> > ----------
> > From: nacelp[SMTP:nacelp@bright.net]
> > Sent: April 18, 2000 5:28 AM
> > To: gmecm@diy-efi.org
> > Subject: Re: vortec distributor pn 1104051
> >
> > Found it, I was thinking the HVS, system was internally gutless, but yes
> > there is a hall effect switch in there.
> >   Did any one come up with an absolute answer about the vortec timing
> chain
> > cover working on older blocks?.
> > Grumpy
> >
> >
> >
> > > Vortec unit has hall effect? sensor, small shutter.  Only pulses once.
> > > Shutter is maybe 20 degrees???
> > > Somebody on this list can get a blow by blow of it.
> > >
> > > 95+ Chevy pickup w/454, pfi
> > > 96+ Chevy pickup w/ smallblock sfi
> > > Shannen
> > >
> > > nacelp wrote:
> > > >
> > > > What exact application is it?.
> > > > year, and engine
> > > > I think (rather sure), that there is one distirbutor with no guts to
> it
> > > > other then for spark distribution.
> > > > Grumpy
> > > >
> > > > Subject: vortec distributor pn 1104051
> > > > > Does anyone have any specifications on this Vortec distributor?
> > > > > Am I correct that it has a cam position sensor built into it and
the
> > > > vortec uses a crank position sensor to determine TDC ?
> > > > > /Marc
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > --
> > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > > > in the body of a message (not the subject) to
> > majordomo@lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
> > >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
> >
> >
> >
> >
> >
>
>
> --------------------------------------------------------------------------
--
> ----
>
>
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>
>
>
>


----------------------------------------------------------------------------
----


>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org