Re: Temp sensor

["nacelp" <nacelp@bright.net>]

> >From looking a the Delpi a while back I seem to remember that all the
> Delpi sensors were functionaly the same (same resistance/temp responce)

Same resistance, very different responses, ie >60 sec, some <5 secs.
They are however some what grouped in repsonse by application, so if your
catalog was prior to tanny heat sensors then it would have been about HVAC,
CTS, and IAT/MAT
Least by my catalog.

> They just packaged them in alot of different ways. I anyone can confirm
> this it may allow a much wider choice as far as packaging goes.
>
> Mike D.
>
>
> Date: Tue, 18 Apr 2000 08:27:49 -0400
> From: "Peter D. Hipson" <mail@darkstar.mv.com>
> Subject: Re: Temp sensor
>
> The 4L80E one is easy to get at, just drop the pan, it is hanging off the
> wireing harness. However, it may be easier to just go to Radio Sludge and
> get a thermistor. If you want I can look up the 4L80E specifications for
you.
>
> At 10:40 PM 4/17/2000 EDT, you wrote:
> >The 4L60-E does have a temp sensor. It is part of a PSA pressure switch
> >assembly. The part is about 6 inches by 3 and the sensor part looks like
a
> >thermister just suspended in the middle of it. I don't know if you could
get
> >it out intact. I'll check into the one for the 4L80-E
> >AL
>
>---------------------------------------------------------------------------
-
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> >
> >
> >
> Thanks,
>         Peter Hipson (founder, NEHOG)
>         1995 White NA Hummer Wagon
> -
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org