[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: '90 Calpaks and PROMs
On Mon, 1 May 2000, TRAX wrote:
> A quick question from a newbie here ...
>
> Those of you who are burning chips from years where the PROM is soldered to
> the calpak ... is it possible to make some sort of adapter or do you have to
> unsolder the PROM, erase the chip, reburn it, and then resolder it to the
> calpak?
>
See:
http://www.hit.net/~rah/epromadaptor01.jpg
http://www.hit.net/~rah/epromadaptor02.jpg
http://www.hit.net/~rah/epromadaptor03.jpg
http://www.hit.net/~rah/epromadaptor04.jpg
IT uses a standard 40+ pin IDC connector modified to proper plug in
the part of the chip that is needed.
Roger
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org