[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ECM #

I've fooled some discontinued software the same way, with the same
type of file.  Things look ok for a while, then the tables get really
unusual.
Shannen

Programmer wrote:
> 
> Still uses a 2732B Eprom, spark table looks to be the same, ID byte is A0.
> There's a lot of similarities, but many differences in table locations.
> Looks like a good one to make an *ecu file for...
> I just "fooled" WinTuner by changing the ID byte to 42 and then making a
> comparison. I've got a stock AULN1947 if anyone wants it (1992 4.3 TBI 4L60
> Astro).
> 
> Lyndon.
> -----Original Message-----
> From: nacelp <nacelp@bright.net>
> To: gmecm@diy-efi.org <gmecm@diy-efi.org>
> Date: April 30, 2000 5:54 AM
> Subject: ECM #
> 
> >Is this a new number for a  747?
> >application is a 90 astrovan 4.3.
> >
> >16144288
> >
> >Thanks
> >Bruce
> >
> >---------------------------------------------------------------------------
> -
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> >
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org