[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: A few lt1 ?'s

At 12:35 PM 5/13/00 -0400, you wrote:

Mike,
The VSS output is not scaled for a speedometer. The Speedometer output 
on the LT1 PCM is set for 4004 pulses per mile! what does the Speedo
want? I rescaled one PCM for 8000 pulses per mile, because the Jag
speedo wants that.

                Ken

> Mike wrote:
>
> My lt1 install i have a electronic speedo from autometer, a ? i have
> is can i run the wire from the computer to the speedo or do i have to
> run one directly from the vss? another ?, the wire that goes to the
> p/n switch. does it ground in p/n or in drive gears? and the torque
> converter lockup wire, what exactly does it do ground when you hit the
> breaks? thanks for any info..
>
> Mike,

        Autometer Electric Speedos are calibrated for 16 Pulses Per Revolution
 and Autometer's Senders are Hall Effect.   FYI.

  Len

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org