[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Bigger injectors didnt fix it / injector sizing



In the roundist of terms for initial guessing, on a N/A engine, yes.
Generally anyone can get that number.  Better tuners get down to .45 and
some lower then that.   There are other variables to influence that thou.
ie, some might run out of AE, or not wantting to run over x% DC....
 Grumpy

> Is a half-pound of hydrocarbon per horsepower hour still the recommended
> yardstick for injector sizing?  This means 2 65lb\hr injectors will
support
> 260 HP.


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org