[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Got some new injectors! Best way to rescale?>




>> Where is a good place to buy TBI injectors and is there
>> anything other than the 55,65,& 85 lb/hr....like say 75 or
>> 90 thats fits the gm tower?
>
>350 pick ups have the 55s
>65 are in some fleet Caprices (colored yellow/Brown)
>Early BBC pickups have the big 90s
>Late BBC have the 80s
>Junkyards
>Sometimes Lindertech will do a upgrade exchange $$ thing.  Depends on their
>on hand mood.  www.lindertech.com used to work
>Grumpy
>   PS located gasoline alley indy IN
>>



There were both 75#/Hr and 90 #/Hr TBI injectors, which will slip into the
TBI pod assembly.  The 75's are service part number 17112560, but are
engraved with 17084304 and are ink stamped Blue/Black.  The 90's are service
part number 17111784, but are engraved with 5235231 and are ink stamped
Blue/Maroon.  The 75's are VERY tolerant of increased fuel pressure (upwards
of 50+ psig) however the 90's are best left well shy of 30 psig.  One
individual 4/1 amp current driver will be required per injector, if your ECM
is not already so equipped.

Of course in a minute or two someone on the list may chime in and disagree
with these findings, so take them for what they are worth :)  Happy junkyard
hunting.


Walt.


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org