Re: Two barrel TBI must have a flaw, I give up.

["Bruce Plecan" <nacelp@bright.net>]

> What kind of "R/C plane dope?"

Comes in a jar, says Hot Fuel Proof, costs a couple bucks goes on with a
paint brush.
  See all the problems you want in it, it works.
I've made all kinds of balsa wood suffers for intakes, and with nothing more
exotic then painting them, they've worked fine.
  I really truely doubt that you'll find anything as potent as model
airplane fuel at a gas pump.....
Grumpy


  Are you talking about soaking it in Hot
> Stuff or something?  Is there anything else that works well?  If you're
> talking about that stuff, I can see two problems: one, that stuff is
> expensive, you might come out ahead buying a chunk of aluminum at the
scrap
> yard and marking it out and paying a machine shop to cut the holes in it,
> and second, the octane enhancing additives that are added to gas should
> dissolve that eventually...
>
> hum, I built an RC plane when I was a kid, and I remember covering the
> firewall and engine mounts with something that made it hard as hell and
> impenetrable to the methanol/nitro methane/oil combination that that thing
> burned...
>
> Mark (would love to make my own spacers and have plenty of woodworking
> tools)
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org