RE: tpi intakes

["Mark M. Pikas" <mpikas@umiacs.umd.edu>]

Damn, I didn't know you were on this list, I just tried to relay what you
posted to the MAFB list in my last email.

Mark

> -----Original Message-----
> From: Timothy Siford [mailto:timsiford@frederickmd.com]
> Sent: Tuesday, June 06, 2000 3:33 PM
> To: gmecm@diy-efi.org
> Subject: RE: tpi intakes
> 
> 
> >TPS has the mini ram,
> >but some guys have had to do lots of work to install them.
> 
> FYI - The results of my MiniRam install can be found at:
> 
> http://www.umount.com/thirdgen/techboard/Forum1/HTML/023732.html
> 
> Talk about power in the upper RPMS!!!
> 
> >What I think **MIGHT** work is down by the head side of the 
> intake manifold
> >grind a 1" hole 3"s up them the end of the runner, For the
> >siamesed runners.
> 
> Views of my AS&M Semi-S LTRs and how I modified the plenum 
> can be found at:
> 
> http://fbody.com/wayne/tpi/
> 
> Notice that the roof of the runners and plenum had been 
> raised.  I could
> have raised it further but I didn't feel like messing with 
> it.  I went with
> the TPIS MiniRam.
> 
> Tim
> 
> --------------------------------------------------------------
> --------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without 
> the quotes)
> in the body of a message (not the subject) to 
> majordomo@lists.diy-efi.org
> 
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org