RE: tpi intakes

["trax" <trax@frederickmd.com>]

Mark,

Yeeup.  This list combined mainly with web info and input from specific
people has allowed me to burn my own PROMs.  I was sick of having to pay out
the a$$ to have TPIS or somebody else burn them.  For under $250 I'm sitting
pretty and doing all my own work :-)

Tim

>-----Original Message-----
>From: owner-gmecm@diy-efi.org [mailto:owner-gmecm@diy-efi.org]On Behalf
>Of Mark M. Pikas
>Sent: Tuesday, June 06, 2000 4:04 PM
>To: 'gmecm@diy-efi.org'
>Subject: RE: tpi intakes
>
>
>Damn, I didn't know you were on this list, I just tried to relay what you
>posted to the MAFB list in my last email.
>
>Mark
>
>> -----Original Message-----
>> From: Timothy Siford [mailto:timsiford@frederickmd.com]
>> Sent: Tuesday, June 06, 2000 3:33 PM
>> To: gmecm@diy-efi.org
>> Subject: RE: tpi intakes
>>
>>
>> >TPS has the mini ram,
>> >but some guys have had to do lots of work to install them.
>>
>> FYI - The results of my MiniRam install can be found at:
>>
>> http://www.umount.com/thirdgen/techboard/Forum1/HTML/023732.html
>>
>> Talk about power in the upper RPMS!!!
>>
>> >What I think **MIGHT** work is down by the head side of the
>> intake manifold
>> >grind a 1" hole 3"s up them the end of the runner, For the
>> >siamesed runners.
>>
>> Views of my AS&M Semi-S LTRs and how I modified the plenum
>> can be found at:
>>
>> http://fbody.com/wayne/tpi/
>>
>> Notice that the roof of the runners and plenum had been
>> raised.  I could
>> have raised it further but I didn't feel like messing with
>> it.  I went with
>> the TPIS MiniRam.
>>
>> Tim
>>
>> --------------------------------------------------------------
>> --------------
>> To unsubscribe from gmecm, send "unsubscribe gmecm" (without
>> the quotes)
>> in the body of a message (not the subject) to
>> majordomo@lists.diy-efi.org
>>
>-------------------------------------------------------------------
>---------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org