RE: '84 Corvette .bin and/or ecu file needed

["Craig Marcho" <marcho@flash.net>]

Well, that'd be a good idea if it were my car... but I'm trying to program
for somebody else that lives a few states away from me! :)

Craig M.

> -----Original Message-----
> From: owner-gmecm@diy-efi.org [mailto:owner-gmecm@diy-efi.org]On Behalf
> Of Bruce Plecan
> Sent: Wednesday, June 07, 2000 1:48 PM
> To: gmecm@diy-efi.org
> Subject: Re: '84 Corvette .bin and/or ecu file needed
>
>
>
> For all that work pitch the oem ecm and just start off right,
> meaning with a
> 747.  If you need to be emission legal call your local ref
> station, and see
> about using a later FBody TBI ecm and do it thata way.
> Grumpy
>
>
> > Hey, if you find one, send one my way too. A guy here at work just
> > bought a '84 vette a couple days ago, and I'm trying to learn about it
> > so we can tweak it a little. Stoopid question, do those have crossfire
> > TBI? Can't find the info on the net to say "for sure", and I haven't
> > seen the car yet. If they do, I'm going to go Archive Digging so that I
> > can figure out all of Doc's little CFI secrets, since that's his
> > "economical" platform of preference and the archives are riddled with
> > tweaking tips. ;)
> >
> > If you don't find one, I might be able to talk the guy in to loaning me
> > his ECM for a bit so I can pull the image.
> >
> > -Andrew
> >
> > Craig Marcho wrote:
> > >
> > > I need to find an ecu file for an '84 Corvette with auto
> tranny. I don't
> > > have the stock eprom yet, so I haven't pulled the bin from it yet. If
> you
> > > have a bin for an '84, stock or modified, I'd appreciate it
> if you could
> > > send it my way or tell me where to find it.
> > >
> > > Thanks,
> > > Craig M.
> >
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
> >
>
> ------------------------------------------------------------------
> ----------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org