Re: Min Cool for Closed Loop Fuel

[romans@starstream.net (Romans, Mark)]

Engine coolant temp.  Below "X" temp, no closed loop, above if other parms
are met yes to closed loop.
Mark
----- Original Message -----
From: "trax" <trax@frederickmd.com>
To: "Gmecm@Diy-Efi. Org" <gmecm@diy-efi.org>
Sent: Monday, June 12, 2000 12:20 PM
Subject: Min Cool for Closed Loop Fuel


> In the program TunerCat there is an ECM constant called "Min Cool for
Closed
> Loop Fuel" for the 730 ECM.  What exactly does this mean?  The stock
setting
> is 45 degrees C (113 F).  Does this mean that if for some reason the ECM
> sees an outside temp of 114 degrees (through use of the MAT sensor) then
> closed loop will never be reached?  Or, does this value apply to coolant
> temperature through the CTS?  Or, something else??
>
> Tim
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org