Re: BIG WinBin vs TunerCat discrepencies

["Programmer" <nwester@eidnet.org>]

The *.ecu files are the problem...you'll have to rework your
own to correct them. I don't think anyone has posted a correct
730 ECU for WinBin as yet--close, but not correct. The info for the ECU's
have been taken from dissembled info--which must be incorrect ??
Lyndon.
-----Original Message-----
From: trax <trax@frederickmd.com>
To: Gmecm@Diy-Efi. Org <gmecm@diy-efi.org>
Cc: Nick Dedio <nickd_92@hotmail.com>
Date: June 14, 2000 3:28 PM
Subject: BIG WinBin vs TunerCat discrepencies


>FELP!  FELP!
>
>I thought that these discrepencies were just limited to what I initially
>mentioned; namely, ...
>
>Coolant fan temps
>Injector flow rate
>Feul cutoff and return (RPM)
>Cold, Warm, and Hot closed loop timers
>
>But, there are much bigger fish in these waters :-(
>
>The VE tables (both) contain the same values ... BUT IN THE WRONG CELLS!!!!
>Has anyone seen this before?  It looks like the tables are turned sideways.
>The values in the 20kpa column for rpms 1600-4800 inside TunerCat are the
>values in WinBin for 1600rpms for 20-100kpa!!!!  What the?  Furthermore,
>TunerCat has this table populated to 5600rpms and WinBin only goes to
>4800rpms.
>
>This discrepency is also true with the spark tables ... but, to a much
>bigger degree.  The tables don't even contain the same values :-(
>
>Does ANYONE know what is up with this?  FELP!
>
>Tim
>
>---------------------------------------------------------------------------
-
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org